DB Bridge information

This section contains technical and parts information for the DB bridge (bass).

Recently I was sent a broken DB bridge to check the repair options. The internal lever was bent/broken, so I made a CAD drawing of the part as it should be (before the damage). Iʼve then had a few of these internal levers made from brass and reassembled the DB bridge. It works perfectly now, and if anybody of you has the same problem, Iʼve got a solution.

Note: this lever was specifically made for the Newburgh version of the DB bridge, but a first quick test has shown that it apparently also works with the Hohner/Spirit type of the D-Tuner bridge.

This lever can be ordered here.